The CF Facnor mainsail furling system is no longer sold by Facnor. The information published on this page is for informational purposes only.

INSTALLATION of the CF MAINSAIL SYSTEMS (FOR INFORMATION ONLY)

Three models of slugs for installation :

See more


the slugs : are fitted in the groove of the mast. no drilling is necessary (Factory drilled).       See more

The Housing sections : Fixed with slugs to the mast + PVC strips

> The edges of the housing section incorporate a round groove

> Standard length = 1,70 m

Booms kit configurations :

> Track installation : with slugs, like the housing sections

> According to configuration :  RC80 Kit standard & RC 105 (provided)

> or optional : KB80 & KB105 Special version with additional sheeves system.

CF MODELS and FEATURES

Parameters CF 80 (22'<39')CF 105 (39'<56')
CF Model 4CF80
5CF806CF807CF807CF1058CF1059CF10510CF105
Boat Length (feet /m)
22' < 39' (6 m < 12 m)39' < 56' (10 m < 18 m)
Luff Length (m)6,80 m8,50 m10,20 m11,90 m11,90 m13,60 m15,30 m17,00 m
Boom Length (feet / m)12' (3,90 m)20' (6 m)
Housing section weight (kg/m)1,850 kg /m3,030 kg /mContact us
Furling section ø (mm / ")30 mm / 1"3/4

OVERVIEW & DETAILS

“Standard” and “Spécial”  versions of Booms kits:

Both versions allow perfect positionning of the clew. But depending on the configuration, you may need to use the KB version with additional sheaves system.

Fig.1 : RC80 & RC 105 standard version (standard delivered):
Ball bearing cars + Track sections. Track installation : with slugs, like the housing sections

Fig.2 : Optional : KB80 & KB105 special version with additional sheaves system :
Complete kit = 1 ball bearing car fitted with a pivoting sheave + 2 needle bearing sheaves (1 front and 1 back) + 1 special end stop.(fig 2). This KB version allows not to use the boom sheaves, often inadequate due to their small diameter and their lack of ball bearings or needles

PLEASE SHARE THE CONTENT OF THIS PAGE